Monday, April 06, 2009

Lowlife: Creation Part Six: They'll Need A Crane

Lowlife: Creation part six page one. This panel contained a couple of tricky compositional problems.
Lowlife © 2009 Rebellion Developments/2000AD
Lowlife created by Rob Williams and Henry Flint

One of the best compliments I've ever received was when Rob Williams told me that he'd ramped up the scale of the action in Lowlife: Creation once he knew I was onboard as artist. A tribute to my mighty powers, I preened to myself, before it dawned on me this actually meant Drawing Lots Of Difficult Stuff.
Now, before I get too far into the business of bitching about the difficulties of drawing, I want to make a couple of things clear; first, I do appreciate how mind-buggeringly lucky I am to make a living doing the thing I love, so I'm not in any way trying to plead that I have a hard life being made to do drawy stuff of any kind.
The second thing is that a good comics writer will play to an artist's strengths and push them farther. In some ways it's like the relationship between coach and athlete - the coach can push the athlete to heights he'd never reach on his own. Given my interest in world-building, that usually means that a good script will involve drawing something very complex - a whole cityscape, say - or present a technical challenge in terms of perspective or storytelling (or both). Some the best-remembered pages in my career have come from pages of script that made me say "Merde alors!* How the hootin' heck am I going to draw that?" on first reading.

*Yes, I really do say "Merde alors."

Pencils for panel one showing duplicated angels
Lowlife © 2009 Rebellion Developments/2000AD
Lowlife created by Rob Williams and Henry Flint

With panel one of part six, the problem was the host of angels in the sky. Rob's script had them hanging there "spaced out evenly," which is a bit trickier than having them in flocks. It did sort out the question of viewpoint, though. If the angels are all floating up on roughly the same plane, we have to be up there near them, otherwise you won't be able to tell what they are (the scale of Mega-City architecture is so great that they'd just look like glowing pinpricks from close to the surface of the water).
I decided to have one big panel where you get a really good look at the angels. That would be the reference shot, and after that I could exploit the scale of the city and just show them as a grid of squiggly dots in the sky. The first drawing decodes the later ones.


Drawing Multiple Angels in Adobe Illustrator

1) Pencil an angel
2) Duplicate and scale to make smaller background figure
3) Duplicate background figure
4) Use Free Transform tool to add perspective
5) Use Blend tool to create intermediate figures
(To make this work at home, before using the blend tool you must first select the two outer figures individually and group the lines within each of them (but don't group the two outer figures together!). If the angels aren't grouped, the Blend Tool will just blend between a single line in each angel (or fail to work at all). You must also click on exactly the same point on both angels when using the Blend tool - picking a wingtip or other prominent point is the best bet.


To speed up the process of drawing multiple angels, I "pencilled" the closest one in detail on a layer in Illustrator. I put two copies of this figure onto an underlying layer and scaled them down a little, positioning them on opposite sides of the page. Then I used Illustrator's Free Transform tool to distort them slightly to obey the perspective grid for the panel (see illustration above). I repeated this process several times, generating five layers of angels, each one smaller than the one above, each one with two figures at the far left and right of the page. I made sure they all lined up to the perspective grid (for the technically minded, they all cross the eye-line at mid-thigh) so they all look like they're occupying right positions in 3D space.
The next bit was a massive cheaty cheat; using Illustrator's Blend tool, I generated multiple copies between the two angels on each layer. I made more copies of the distant angels and fewer of the closer ones. You can tweak the number of copies generated by the blend, so I played about a bit until the lines of Angels looked right.
Then I gritted my teeth and inked them all by hand, adding little individual variations and tweaking the drawing where the Free Transform distortion didn't look quite right. Technology can only do so much.

The finished version of page four panel two. The poses of the figures on the raft were borrowed from Gericault's painting The Raft of the Medusa (below left).
Lowlife © 2009 Rebellion Developments/2000AD
Lowlife created by Rob Williams and Henry Flint

The "enormo-crane" on page three was a different challenge; although it's a relatively simple shape, it's made up of complex girder-work, and I wanted that to look spot-on in perspective. The simplest solution was to build a 3D model to trace from.

Left: Gericault's Raft of the Medusa, used as reference for the figures on the raft (above)

After combing Google for picture reference, I did a few preparatory sketches, opting for a beefed-up design that was like two current-day cranes strapped side-to-side. If I'd been drawing a Mega-City construction scene I'd have gone for some sort of robot arm arrangement for lifting materials, but as we were seeing the crane without a context I opted for a recognizable design.


The "enormo-crane" modelled in Carrara 3D. I was able to quickly assemble the girder-work by drawing it in Illustrator and importing it into Carrara.
Lowlife © 2009 Rebellion Developments/2000AD
Lowlife created by Rob Williams and Henry Flint

Building such a structure wasn't as difficult as it might seem; my 3D program, Carrara, lets me import Illustrator files, so I drew the base, top, side and end of the girder-work in Illustrator and then imported them into Carrara to extrude them into 3D objects. Once I'd made one girder-work object, I just duplicated it as many times as needed (the front arms, rear arms and supporting column are all made of copies of the same girder-section at different scales). If I'd been building the model to be used in its own right, I'd have taken a more subtle approach, but since it was just for picture reference I didn't need to be too precious.
The most difficult bit for me was making the curvy counterbalancing arms on the sides. I tried using a 3D application called Hexagon for that, and it took me ages, with lots of false starts. I don't think Hexagon is that hard to use, but it was my first try, and 3D programs are notorious for their steep learning curves.

Pencils showing the placed crane render and the various perspective grids, including a special one for the angels in the sky.
Lowlife © 2009 Rebellion Developments/2000AD
Lowlife created by Rob Williams and Henry Flint

In the end, I spent most of a day on the thing. I don't think it made the drawing any quicker, but I do think it made the crane look more convincing. As with all this sort of reference, I screen-grabbed a shot from the Carrara interface, imported it into Illustrator, and used it to establish the perspective for the rest of the drawing. A tip for anyone trying this technique: when you're setting up your camera in the 3D program, have your page roughs to hand and set up the angles according to those. It saves an awful lot of false starts.
In the end, the 3D approach also turned out to be very helpful with my next problem...

The finished article. With such distorted perspective and so much detail, it was a struggle to make the storytelling clear.
Lowlife © 2009 Rebellion Developments/2000AD
Lowlife created by Rob Williams and Henry Flint

The last three panels of the strip were a particular challenge. Superficially simple-sounding (three repeat panels mean less work, right?), the problem was one of angle and point of view. The panels descriptions required being able to see straight out along the crane arm and straight down at the same time. An extreme wide-angle perspective was needed.
This isn't too difficult to construct; for three-point perspective you place the vanishing points very close to (or even inside) the panel borders, then follow the rules of perspective. This will produce massive distortions towards the corners of the frame, so the trick is to hold your nerve when the drawing starts looking weird. About half-way through, you'll be convinced the drawing has gone horribly wrong, but if you keep following the perspective, the final distortion will look believable.
Of course, I had to fit my 3D model into the composition. I was a bit worried, as I remembered that Carrara only supported cameras with a wide-angle up to 24mm (not nearly enough for what I had in mind). Happily, it turned out I was remembering a old version of the application; a recent upgrade allowed cameras down to an extreme wide-angle of 6mm. After a little experimenting, I found 15mm gave me the perspective I was looking for.


Pencils for the last three panels of page five. The complex perspective was based on a render from the crane model in Carrara (placed into panel 1 & 2 and also below left). Panel 3 is left empty at this stage as the background from panel two will be copied into it.
Lowlife © 2009 Rebellion Developments/2000AD
Lowlife created by Rob Williams and Henry Flint

I rendered the scene in two versions, both containing a deformed plane to represent the broken billboard and round-ended cylinder as a placeholder for the building supporting the billboard. The first render also had a plane representing the water-level. The plane was covered in a chequer pattern, to help me work out the perspective of the scene.

Left: 3D renders for panels 1 & 2


I placed the renders into Illustrator and built perspective grids from them. The grids were all on separate layers so I could show and hide them as needed. From these I did rough pencils of the cityscape and the figure of Frank (see above). I didn't bother filling in the background to panel 3, as I was just going to copy panel 2 into it.


Left: The last panel as it appeared in Illustrator. Frank's silhouette is actually in there, but you have to look closely.
Right: Post-processing in Photoshop included a lot of work to pull forward the figures of Frank and the guys on the raft (the small dots down on the vanishing point).
Lowlife © 2009 Rebellion Developments/2000AD
Lowlife created by Rob Williams and Henry Flint

I drew the backgrounds and the foreground figures of Frank and the guys on the raft separately. This has one big disadvantage - when I draw a figure and a background together, I automatically "thin out" the backgrounds around foreground figures, making them stand out. When the foregrounds are done separately, the backgrounds can easily overwhelm them - especially in this case, when the foreground figures are tiny and the backgrounds are very detailed.
In Lowlife, I do a fair amount of post-processing to the drawings on Photoshop, adding textures and grime. In these panels I also spent a fair amount of effort putting haloes round the figures and otherwise fading down the backgrounds so as to make the figures stand out (you can see the difference in the two panels above). A technical problem had become a storytelling one.

In the end I'm not sure about the clarity of these panels. It's one of the few cases where I've felt constrained by the low page-count of 2000AD episodes; in a 20-page US comic we'd have been able to devote a page or maybe two to the sequence and make it all much clearer.

9 comments:

james corcoran said...

Hello Matt
I thought the strip read really well,really enjoying Lowlife its a shame it's nearly finished.As ever these posts are very informative to the struggling amatuer
Many thanks James

Kerrin said...

Another brilliant post comrade Brooker. Wonderfully understandable insights into how you produce all of this lovely stuff. It's an education, and an inspiration. Cheers Kerrin.

mike kinsella said...

I'm constantly amazed at how you can draw this on a computer and keep deadlines! Amazed and jealous!
A great insight into the thought process and execution of a page. Thanks for showing us the magic Matt!

Michael Grant Clark said...

It's great seeing the construction of the work. I'm doing similar stuff just now, using Cinema 4D and poser to create outlines for concept artwork for our next movie.

I say I'm doing the same work but my creative and talent plug-ins are of a much earlier model

Craig Grannell said...

You need to write a book on your technique for comic-book work. Seriously.

mike kinsella said...

I agree with Craig-you should think about doing a book Matt!

Including your previous insights on Levithan and War of the Worlds, theres plenty there for the guts of a book!

shane oakley said...

matt - you are fucking mad! and a genius! apparently they say those two go together.

all this effort you put into a strip, in the time given, it's quite obvious you either don't sleep, or - god help us all - have finally managed to clone yourself!

stunning stuff, mate. the compostion, the texture, the drama, puts most of us to shame. and - like I've said a zillion times - you should look into getting some HOW TO book out, your blog is usually the first place i look for the 'answers', either that or I'm bugging you personally.

you've got a hungry audience who'd snap it up. DO IT!!

Gary Crutchley said...

I second and even third and fourth that. Get a book out Matt.
There are a lot of "HOW TO" books out there, but I've yet to read one as comprehensive and as easily understood as the tutorials you do.
I'm like Shane, your blog is always the first place I turn to if'n I need a bit of help.
Oh and Shane's right when he says that you're a mad genius.

Andrew Glazebrook said...

Really super work !! Loved your War of the Worlds book, fab stuff !!!